5 Things To Know About Surface Preparation While Interior Painting in Shelby Township, MI
When you have painting work to do on the interior of your home, there is a certain amount of surface preparation that has to take place prior to the actual painting.
Though some might think that this surface preparation is not at all important and just a waste of your time, this could not be further from the truth — properly preparing an interior surface is fundamental to a good paint job.
With that being the case, here are five things to know about surface preparation while interior painting in Shelby Township, MI.
1. Cleanliness Is Fundamental
There is a school of thought that says that since you are going to be painting your interior walls, what does it matter if the walls are clean or not?
The thought is that the paint is going to cover over the walls no matter what is on them — but this is a bit of a misunderstanding of the painting process.
When you paint a a surface such as an interior wall, if the surface is not both clean and dry — because if if it is not clean, you will find that paint does not properly adhering to the surface.
2. Dry Before You Paint
Speaking of having clean walls, one of the things you need to realize is that once you have cleaned the walls, you can’t just continue with the painting process immediately without first making sure that the walls are entirely dry.
The reason that this is the case is that if you paint over walls that are not dry, you are going to end up with paint problems that are not so easily resolved.
You can end up with bubbling effects on your walls that cannot just be flattened but rather have to be entirely scraped off of the walls and then have the walls be fully repainted.
3. Testing Out More Simple Cleaning Products First
Before you get into more harsh cleaning products, it’s useful to first try more simple ones that are gentle on the wall such as just plain water to start.
It turns out that you can get a lot of cleaning done with simple water, but in some cases, this is not enough — particularly when you are facing greasier stains that may have set in from not noticing that they are there or just not making the time to clean them.
When this happens you know that you will have to try stronger solutions, perhaps even ones that incorporate dish soap to help beat the grease.
4. The Principal Of Sanding Before Painting
Before you paint, you are going to have a surface that is as smooth as possible.
If you do not do everything that you can to ensure that the surface is smooth, you will have a lot more difficulty painting the walls (the paint will not go on as easily ), and the paint job overall will not last nearly as long.
One good way to do this is to first sand prior to beginning your painting.
5. Prime To Make The Ultimate Smooth Surface
To make sure that the surface you are going to paint is as smooth as possible, before you apply the first coat of paint you are going to want to first apply a coat of what is called primer.
Primer is good to apply to the surface that is going to be painted because it is a better surface upon which the paint can be applied than the actual surface of the walls you are looking to paint.
Primer is better in terms of adhesion and a paint job that is applied to a coat of primer will end up lasting longer than paint that is applied to a surface without primer.